cts ats/ats-sm series communications components crystals features: frequency range: 3.5 to 60 mhz through hole or surface mount rugged resistance weld seal low cost: at-cut resonators unique frequencies or tolerances also available these low profile at-cut crystals are ideal for dense board layouts or tight headroom limits. these rugged (metal can) resistance weld seal parts have the same favorable temperature stability as the full size mp-series crystals and are available bulk packed or tape-and-reel loaded. electrical specifications: example part numbers: 171 covington dr. bloomingdale, il 60108-3107 phone 800-757-6686 fax 630-295-6608 e-mail: www.ctscorp.com crystals crystals crystals crystals part number frequency (mhz) load/ series part number frequency (mhz) load/ series part number frequency (mhz) load/ series a ts036 3.579545 18pf a ts08asm 8.000000 20pf a ts08asm 8.000000 20pf a ts036sm 3.579545 18pf a ts098 9.830400 20pf a ts143sm 14.318180 series a ts037 3.686400 20pf a ts098sm 9.830400 20pf a ts15 a 15.360000 20pf a ts037sm 3.686400 20pf a ts10asm 10.000000 20pf a ts15asm 15.360000 20pf a ts040 4.000000 20pf a ts100 10.000000 series a ts160 16.000000 series a ts040sm 4.000000 20pf a ts100sm 10.000000 series a ts160sm 16.000000 series a ts042 4.915200 20pf a ts111 11.059200 20pf a ts200 20.000000 series a ts042sm 4.915200 20pf a ts111sm 11.059200 20pf a ts200sm 20.000000 series a ts050 5.068800 20pf a ts120 12.000000 series a ts204 20.480000 20pf a ts050sm 5.068800 20pf a ts120sm 12.000000 series a ts204sm 20.480000 20pf a ts060 6.000000 20pf a ts122 12.288000 20pf a ts245 24.576000 series a ts060sm 6.000000 20pf a ts122sm 12.288000 20pf a ts245sm 24.576000 series a ts08 a 8.000000 20pf a ts143 14.318180 series parameter specification frequency range 3.5 - 60 mhz calibration tolerance 0.003% ( 30 ppm) at + 25 c temperature stability 0.005% ( 50 ppm) ref. + 25 c reading operating temperature range -20 c to +70 c (std.) or -40 c to +85 c operating mode fundamental (or 3 rd o.t. as applicable) drive level 100 microwatts shunt capacitance 7pf, max aging <5 ppm/yr.
mechanical/environmental specifications package type: leak test metal cover; hermetic seal base <2x10-8cc-atm/sec resistance weld seal storage temperature: insulation resistance: -40 to +85c 500 mohm min @ 100v solder reflow capability: +260c for 10 seconds maximum ordering information a complete part number looks like: ats____ ____ ____ - _* __ for the through hole part, or ats____ ____ ____ -sm _* __ for the surface mount part * optional suffix codes are: ?ins? = insulating spacer (ats only) ?t? = tape and reel packaging ?l? = trimmed leads ?w? = trimmed leads and insulating spacer custom frequencies specified upon request. contact cts for more information 171 covington dr. bloomingdale, il 60108-3107 phone 800-757-6686 fax 630-295-6608 e-mail: www.ctscorp.com cts ats/ats-sm series communications components crystals crystals crystals crystals crystals
|
